
Dimensional stability grade for connectors and tool casings
| Property | Typical Value | Test Method |
|---|---|---|
| Melt Flow Rate (220°C, 10 kg) | 22 g/10min | ASTM D1238 |
| Mold Shrinkage | 0.4 to 0.7% | Typical values |
| Heat Deflection Temperature | 79°C | ASTM D648 |
| Vicat Softening Temperature | 93°C | ASTM D1525 |
| Izod Impact, Notched (23°C) | 20 kJ/m² | ASTM D256 |
| Izod Impact, Notched (-30°C) | 10 kJ/m² | ASTM D256 |
Typical values for reference only; confirm against the grade TDS for design work.
Low shrinkage reduces warpage on flat and long parts.
Notched impact of 10 kJ/m² at -30°C for outdoor equipment.
MFR 22 supports quick fill and shorter molding cycles.
Original LG Chem bags with lot traceability.
Drying: Dry resin at 80 to 90°C for 2 to 4 h before processing.
Barrel temperature: Follow the grade TDS window; typical ABS range 200 to 240°C.
Mold temperature: 40 to 70°C for balanced surface finish and demolding.
Injection: Medium speeds for thick walls; fast fill for thin sections.
Dimensional accuracy for electrical connectors and electronics housings.
Impact resistance plus stable geometry for power tool enclosures.
Heat performance near dashboards and warm cabin zones.



Scan to WhatsApp