
High flow ABS for thin-wall molding with HDT 92°C
| Property | Typical Value | Test Method |
|---|---|---|
| Heat Deflection Temperature | 92°C | Typical values |
Typical values for reference only; confirm against the grade TDS for design work.
Flow reaches distant ribs and bosses in compact designs.
HDT 92°C covers housings near power supplies.
Fast fill reduces overall molding cycle time.
Moderate thermal stress zones in vehicle cabins.
Drying: Dry resin at 80 to 90°C for 2 to 4 h before processing.
Barrel temperature: Follow the grade TDS window; typical ABS range 200 to 240°C.
Mold temperature: 40 to 70°C for balanced surface finish and demolding.
Injection: Medium speeds for thick walls; fast fill for thin sections.
Thin-wall enclosures for electronics.
Trim managing moderate heat.
Compact covers with fine detail.



Scan to WhatsApp