
Transparent ABS with flow and impact balance for medical parts
Full typical property table for TR558A is being verified against the LG Chem TDS and will be published shortly. Share your application and we will provide the data sheet values you need.

TR558A balances melt flow and notched impact, two properties that often pull in opposite directions on medical housings. Thin diagnostic device walls fill completely while snap latches and drop points keep their toughness.
Clarity supports status LEDs and fluid level indication without a second clear window operation. Processors should validate cleaning agents and sterilization contacts against their own device requirements before release.
Drying: Dry resin at 80 to 90°C for 2 to 4 h before processing.
Barrel temperature: Follow the grade TDS window; typical ABS range 200 to 240°C.
Mold temperature: 40 to 70°C for balanced surface finish and demolding.
Injection: Medium speeds for thick walls; fast fill for thin sections.
Diagnostic and monitor housings with clear sections.
Device components needing clarity and toughness.
Integrated clear panels for indicators.



Scan to WhatsApp