
High rigidity ABS for extruded sheet and pipe, HDT 90°C
| Property | Typical Value | Test Method |
|---|---|---|
| Heat Deflection Temperature | 90°C | Typical values |
Typical values for reference only; confirm against the grade TDS for design work.
High rigidity lets RS650 sheet span supports in machine guarding and wall cladding without extra thickness.
HDT 90°C plus ABS toughness makes pipe that resists deformation in warm service water lines.
Sheet made from RS650 forms cleanly into trays and covers on standard vacuum forming lines.
Drying: Dry resin at 80 to 90°C for 2 to 4 h before processing.
Barrel temperature: Follow the grade TDS window; typical ABS range 200 to 240°C.
Mold temperature: 40 to 70°C for balanced surface finish and demolding.
Injection: Medium speeds for thick walls; fast fill for thin sections.
Guarding, cladding and forming stock.
Warm service water and drain pipe.
Machine covers and trays.



Scan to WhatsApp